Aryana wrote:Ok, he is working on the scale version so we can see/approve it before we give it the green light. I'll post it here as soon as it's ready.
Oh...NOOOOO..... I was about to pitch-in with the rest of you guys too...but not if GREEN lights are involved. Any way he could make the decals RED?
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention. An originality nut (mostly) for the right reasons.
Aryana, Make the Logo have 170 AB so that someone can cut out the letter they dont want for their aircraft. That way you can personalize it more with no additional expense and No one with an A model will compain to you. Just a thought. D
Yes prop looks a bit long. Wouldn't take much for it to strike the ground in that plane but I'm guessing I could live with it.
Forgive me here but I've never messed with these types of decals. I take it, that is the set of two. Are they stick-able from both sides or on one side. I have a plan and I need to be able to apply both of them pointing in the same direction. Not asking for a change for me just verifying so I know before hand.
My playground....
35°58’52.01” N 93°06’27.51” W
'54 170B White and Green with a hint of Red
juredd1 wrote:Yes prop looks a bit long. Wouldn't take much for it to strike the ground in that plane but I'm guessing I could live with it.
Forgive me here but I've never messed with these types of decals. I take it, that is the set of two. Are they stick-able from both sides or on one side. I have a plan and I need to be able to apply both of them pointing in the same direction. Not asking for a change for me just verifying so I know before hand.
your plan will not work. single sided adhesive vinyl.
Put me down for a third set then please, unless someone wants to swap out their left ones for my right ones, decals that is just to be perfectly clear. I don't have very many plans that come together so I'm going to try to force this one.
Kind of liking David's without the wheel pants......just sayin.
I think the profile can be kept generic enough to where it will work for an A, B and straight 170 all at the same time.
That and I'd just put "Cessna 170" (IMO) as I never really make the distinction when telling people what kind of plane I fly. (IMO)
Also, if we make it type specific, how do we handle the '52 which is half A and half B in a lot of ways.
Can I get one with two 4" venturis on the right side, 8.0x6.0 tires, a 80/46 prop and a long range VOR antenna on the tail. I would also like it to be in formation with an F-15 and have C170U2 depicted in the left seat with Just an F-15 pilot in the instructor pilot. Please make the left wing Green, Right wing Red and 3oz of MMO in the green wing tank and 100LL in the Red tank. Also make the decal 10% smaller because a 42R just doesn't quite fit the same.
counsellj wrote:............Please make the left wing Green, Right wing Red and 3oz of MMO in the green wing tank and 100LL in the Red tank. Also make the decal 10% smaller because a 42R just doesn't quite fit the same.
Jughead
Jughead, that paint scheme is perfect for right hand traffic patterns but would never work in left hand traffic patterns as the airplane would be constantly turning right what with the left wing being faster green and the right wing slower red!!!
Arish, put me down for one set of each.
John E. Barrett
aka. Johneb
Sent from my "Cray Super Computer"
counsellj wrote:............Please make the left wing Green, Right wing Red and 3oz of MMO in the green wing tank and 100LL in the Red tank. Also make the decal 10% smaller because a 42R just doesn't quite fit the same.
Jughead
Jughead, that paint scheme is perfect for right hand traffic patterns but would never work in left hand traffic patterns as the airplane would be constantly turning right what with the left wing being faster green and the right wing slower red!!!
Arish, put me down for one set of each.
But as a Master Aerobatic instructor, I would be inverted in the pattern for left turns. Ha Ha