Rebuilding 1948 fuel selector

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
48rwflyboy
Posts: 40
Joined: Wed Feb 18, 2015 11:05 pm

Re: Rebuilding 1948 fuel selector

Post by 48rwflyboy »

Kurt, call Wentworth back and talk to Jason (I think that was my contact there). They should reimburse you 100% including shipping. They only had two of the 0511122 valves. I bought one of them and perhaps whoever you talked to was not aware of the 2nd valve that Jason identified or maybe it was sold. In any event they owe you a complete refund.
Ernie
Top
Kurt Aichele
Posts: 121
Joined: Sun Dec 03, 2006 3:44 am

Re: Rebuilding 1948 fuel selector

Post by Kurt Aichele »

Yep, spoke to Jason. He was the rep that sold me the valve. Talked to him today and told me to send it back. He said it will be a full refund, including S/H both ways. Thanks again for all of the helpful info.
Top
48rwflyboy
Posts: 40
Joined: Wed Feb 18, 2015 11:05 pm

Re: Rebuilding 1948 fuel selector

Post by 48rwflyboy »

From an old thread listing other possible salvage yards.....
http://www.cessna170.org/forums/viewtop ... age#p65356
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.