Generator coupling parts.

[sreeves]

Anyone know where replacement parts for the generator coupling might be available?

[Bruce Fenstermacher]

Aircraft Spruce, Aircraft Specialties Services are two.

BTW the part number for the drive coupling bushings in Continental parts manual for the C-145/0-300, X130014 is 626543. I can't find that part but it seems the number is now 632050.

[sreeves]

Thanks I'll try that. And Aircraft Spruce is a good source for that?

[Bruce Fenstermacher]

Spruce is $15, Aircraft Specialties $6. Unclear if Spruce is selling you two for that price. You need two.

[sreeves]

Thanks! It has been awhile since I have been into that assembly. Do you recall if those bushings are the only rubber parts?

[Bruce Fenstermacher]

As far as I remember.

[sreeves]

OK

[sfarringer]

There is also an o-ring, and an oil seal.

[sreeves]

Yes I see that and the last time I was into that part I remember having a hard time finding those as the continental manual part number on at least one of them is apparently wrong or no longer available. So if you have a source for those or the correct part numbers I'll add it to my upcoming order.

Thanks

[n3833v]

Spruce has all the parts you need. I just replaced my generator and drive parts in July.
I used Continental Aircraft Engine Parts Catalog - Form X30014, Change 2, Aug 2011, page 32 for my parts breakdown.

John

[sreeves]

Thanks John, any chance you could take a picture of that page and either text it to me or email it to me?

Steve Reeves
727-415-3610
onegreatpilot@gmail.com

[Bruce Fenstermacher]

Computers and web sites can be a wonderful thing. Search Aircraft Spruce and generator and your likely to come to the page John mentioned.

Here is a link: http://www.aircraftspruce.com/catalog/e ... tparts.php

[sreeves]

You guys are great! I found that diagram and it shows the seal but no o-ring.

[n2582d]

Stephen,
Check out AK172-6A in the Maintenance Library. You will find in fig. 1 that the o-ring is p/n AN123864. It's also shown in the TCM Illustrated Parts Catalog on fig. 18. This o-ring has been superseded to AS3570-111.

[sreeves]

Thanks Gary. It seems a lot of the old numbers in the IPC and TCM manuals are outdated and have been superceded with new ones. Is their a cross-reference available for the new and old numbers? How did you determine the new number? If I knew that I wouldn't have to ask so many questions of the members.