Thought I would share some shots on the progress of my plane. We have been busy prepping and cleaning getting ready to paint 80A. We decided to paint the fuselage first so I could get started hanging the engine while the work continues on the winds. We've been fixing old patches taking out all the screws and replacing with rivets, new windshield, installed BAS tail pull and BAS shoulder harnesses. Also put in a new tailwheel bracket.
nippaero wrote:Thought I would share some shots on the progress of my plane. We have been busy prepping and cleaning getting ready to paint 80A. We decided to paint the fuselage first so I could get started hanging the engine while the work continues on the winds. We've been fixing old patches taking out all the screws and replacing with rivets, new windshield, installed BAS tail pull and BAS shoulder harnesses. Also put in a new tailwheel bracket.
Painting the glare shield
New tailwheel bracket
New windshield (LP Aero) going in
You need to paint that glare shield a flat black, or cover with black upholstery material. The white will reflect on the windshield....very annoying !
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.