Float Kit drawings

bagarre · Post by **bagarre** » Sat Nov 25, 2017 12:42 am

Does anyone have a set of drawings/documentation to install a float kit in a 170?
I have all the parts collected but no supporting paperwork just yet.

cfzxo · Post by **cfzxo** » Sat Nov 25, 2017 4:41 am

Depending on the model, I sent a copy of my float kit install drawing that I received from Cessna to the association via G. Horn .The only snag was that the drawings where specific to my serial number, 1955 170b. Check with the association, as I thought I still had a copy around here,but am unable to locate it or I would send it

marathonrunner · Post by **marathonrunner** » Sat Nov 25, 2017 5:20 am

I sent my drawings from Cessna to the club years ago. If you cannot get them I can supply them.

Post by **GAHorn** » Sat Nov 25, 2017 7:00 pm

Bill, I had your drwgs scanned to a pdf file and emailed to a Member recently. I also thought I'd posted them but will follow up to be certain.

Here it is (Edo 2000s): http://cessna170.org/forums/viewtopic.php?f=40&t=13825

Trebork2 · Post by **Trebork2** » Sat Nov 25, 2017 11:41 pm

How difficult was it to acquire the parts?

bagarre · Post by **bagarre** » Sat Nov 25, 2017 11:46 pm

I got mine out of a bone yard from a wrecked bird with a float kit.

The International Cessna^® 170 Association

Float Kit drawings

Float Kit drawings

Re: Float Kit drawings

Re: Float Kit drawings

Re: Float Kit drawings

Re: Float Kit drawings

Re: Float Kit drawings