The one on top looks awful familiarn2582d wrote:$50 is a great price. Here's how my 8 hole panels turned out last year. Thanks for all the CAD work Ryan.
Floating Panels
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
bagarre
- Posts: 2615
- Joined: Thu Sep 30, 2010 11:35 pm
Re: Floating Panels
-
Ryan Smith
- Posts: 1213
- Joined: Tue Nov 25, 2008 4:26 am
Re: Floating Panels
That is too cool, Gary! I was wondering what happened to that project.
I'm down in South Carolina getting the panels cut right now. I am not happy with the cut of the light post holes and the instrument holes, so I'm just cutting the outline of the panel, which is spot on, and marking the centers of all instrument and mounting holes and will drill everything out and use an instrument punch to cut the holes. I hope to have something to show tomorrow or Monday.
I'm down in South Carolina getting the panels cut right now. I am not happy with the cut of the light post holes and the instrument holes, so I'm just cutting the outline of the panel, which is spot on, and marking the centers of all instrument and mounting holes and will drill everything out and use an instrument punch to cut the holes. I hope to have something to show tomorrow or Monday.
-
brianm
- Posts: 148
- Joined: Fri Dec 09, 2016 12:04 am
Re: Floating Panels
Apologies for digging up an old post but I was wondering if the CAD files are available for the second and third panels in Gary's photo? I'm looking to redo my panel in an 8-hole layout without the dress panel. I found the thread on the MX Forum but it looks like all of the DXFs there assume that you will be using the cover.
Brian M
N2669V - '48
N2669V - '48
-
Ryan Smith
- Posts: 1213
- Joined: Tue Nov 25, 2008 4:26 am
Re: Floating Panels
Pay me enough money and anything is possible.brianm wrote:Apologies for digging up an old post but I was wondering if the CAD files are available for the second and third panels in Gary's photo? I'm looking to redo my panel in an 8-hole layout without the dress panel. I found the thread on the MX Forum but it looks like all of the DXFs there assume that you will be using the cover.
PM me your email address and I’ll send you the files you need.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.