mkraynick wrote:Anybody have any recommendations for the best routing to the spark plugs for a new ignition harness? There seem to be multiple possibilities. My lower wires were routed from the crankcase side of the cylinders but teh new harness seems to suggest routing along the faces of the valve covers with clips. Any suggestions or even pictures would be greatly appreciated.
Harness routing [merged thread]
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
mkraynick
- Posts: 6
- Joined: Fri Sep 06, 2019 6:52 pm
Harness routing [merged thread]
Anybody have any recommendations for the best routing to the spark plugs for a new ignition harness?
-
n2582d
- Posts: 3013
- Joined: Mon Apr 29, 2002 4:58 am
Re: Harness routing
Fig. 14 of the O-300 IPC
Page 11-15 of System Support Manual for High Tension Ignition Harnesses gives more current part numbers for clamps.
Page 11-15 of System Support Manual for High Tension Ignition Harnesses gives more current part numbers for clamps.
Gary
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.