All,
I've been watching the 170 market and finally got in as caller #1 on an airplane that looks pretty reasonable. Any recommendations for a pre-buy mechanic in the Seattle area?
The airplane has an April annual, so that's something to consider in pre-buy/negotiations.
Thanks!
Seattle Pre-Buy
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 44
- Joined: Sat Jul 20, 2019 1:56 pm
Re: Seattle Pre-Buy
I used a guy name John Rollston, he is very familiar with 170's and did a great job.
https://www.linkedin.com/in/john-rollston-aa725397/
I have his phone number if decide you want to contact him.
https://www.linkedin.com/in/john-rollston-aa725397/
I have his phone number if decide you want to contact him.
1950 Cessna 170A model
- IP076
- Posts: 89
- Joined: Wed Aug 21, 2019 7:37 pm
Re: Seattle Pre-Buy
Thanks! I may give him a call. I've got some other friends who have a name or two also.
Any hangars near COE? I'm living in Spokane Valley. Hoping to find somewhere at Felts eventually.
Any hangars near COE? I'm living in Spokane Valley. Hoping to find somewhere at Felts eventually.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.