Someone to make a wiring diagram for new panel

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
Vertical
Posts: 151
Joined: Mon Oct 08, 2018 12:41 am

Someone to make a wiring diagram for new panel

Post by Vertical »

Does anyone know of a shop/contractor/person who is skilled in this? (And available and willing)

I’d like to pay someone to complete the drawings based on already chosen equipment.

Any recommendations would be appreciated.

Thanks!

Disclaimer: This is for a supercub...gasp..
Top
hilltop170
Posts: 3485
Joined: Sat May 06, 2006 6:05 pm

Re: Someone to make a wiring diagram for new panel

Post by hilltop170 »

Most avionics installers do this on a regular basis and can make up a harness as well.

I would use a local avionics shop where you can coordinate in person with them.
Richard Pulley
2014-2016 TIC170A Past President
1951 170A, N1715D, s/n 20158, O-300D
2023 Best Original 170A at Sault Ste. Marie
Owned from 1973 to 1984.
Bought again in 2006 after 22 years.
It's not for sale!
Top
User avatar
GAHorn
Posts: 21291
Joined: Fri Apr 12, 2002 8:45 pm

Re: Someone to make a wiring diagram for new panel

Post by GAHorn »

hilltop170 wrote:Most avionics installers do this on a regular basis and can make up a harness as well.

I would use a local avionics shop where you can coordinate in person with them.

+1
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.