I'm looking for new port & starboard baffles for my O300.
My baffles are cracked from heat & vibration, and when I took them off to do some engine work, many of the mounting holes cracked right off like dry crackers.
Are these the correct ones to order? Specifically—
AF0550164-8
AF0550164-7
Or if any one has some used ones they're willing to part with that works too
You do not have the required permissions to view the files attached to this post.
Well…you’ve got patterns already! Some sheet aluminum from Spruce, tin-snips, and a few pop-rivets…..
(Write the article, take pics, and submit for The 170 News and you’ll have a chance to win notoriety and a years free Membership!
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention. An originality nut (mostly) for the right reasons.
Reece, If all you’re looking for are the ones outboard of the valve covers then you have the correct ones. The ones from Airforms are high quality; you won’t be disappointed. I replaced every single piece of mine with the hammertone finished ones at overhaul 16+ years and 800+ engine hours ago and they still look new. Frankly it wouldn’t have been worth the time and effort to me to have done them myself.
Miles
“I envy no man that knows more than myself, but pity them that know less.”
— Thomas Browne
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.
