Im trying to figure out what to do my new panel. So I started collecting panel pictures... since I did the work I decided to consolidate them here. Hopefully this is within the forum rules? And any other panel pictures posted here would help others doing what Im doing.
How it is (added 2nd Horizon, CDI, and Addt’l Lighting):
IMG_0156.jpeg
You do not have the required permissions to view the files attached to this post.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention. An originality nut (mostly) for the right reasons.
Probably not factory, but others here will know more about what the factory panel looks like. I'll go through the logbooks and see if there's anything in there. Here's a picture of the panel before I added the GI275s.
You do not have the required permissions to view the files attached to this post.
JimNelson wrote: ↑Fri Jun 27, 2025 2:44 pm
Here's a somewhat better picture of my (N9955A) panel posted above.IMG_1781.JPEG
Thank you...
Did you modify the panel to make the lower hole in the middle? That doesnt seem to be factory.
Check your IPC (A-model, Fig 34:
IMG_3894.png
You do not have the required permissions to view the files attached to this post.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention. An originality nut (mostly) for the right reasons.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.