Crankshaft Seal

N73087 · Post by **N73087** » Sun Dec 19, 2004 8:19 pm

What is the part # for the C145-2 crank seal. The number listed in spruce is the same as the C85 taper shaft seal. That doesn't sound right.
Dave

mit · Post by **mit** » Mon Dec 20, 2004 1:41 am

N73087 wrote:What is the part # for the C145-2 crank seal. The number listed in spruce is the same as the C85 taper shaft seal. That doesn't sound right.
Dave

figure 4 item 19 listed as no number then it shows 530974. felt seal 539242. Might be 539241 that is seal and felt assy. I bet that didn't help did it?????

Post by **Bruce Fenstermacher** » Mon Dec 20, 2004 4:17 am

SA530917 is the seal that i put in my C-145 at overhaul. Got that number from the Superior dealer who found it crossed to the orginal seal number 530974

zero.one.victor · Post by **zero.one.victor** » Mon Dec 20, 2004 6:35 am

The parts list from my major overhaul 3 years ago jibes with Bruce's info: crankshaft seal is p/n 530917.

Post by **GAHorn** » Mon Dec 20, 2004 4:23 pm

PN 530917, crankshaft seal (alternate PN 539241) listed by El Reno for $31. 800-521-0333

N73087 · Post by **N73087** » Wed Dec 22, 2004 1:55 am

I ordered the 530917 seal, it should be here in a couple of days. I had a taper shaft C85 once, and that seal was not split, it just slid on over the taper, that's why I questioned the same PN for the C145.

The International Cessna^® 170 Association

Crankshaft Seal

Crankshaft Seal

Re: Crankshaft Seal