Door weatherstrip

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
Bruce Fenstermacher
Posts: 10419
Joined: Tue Apr 23, 2002 11:24 am

Post by Bruce Fenstermacher »

Nuts. Just did a little test with some 3M 1300L forma mechanic at the field. It doesn't stick to the silicone based seal I have. It says as much on the can that is why I tested it.

Any one have any other thoughts what might stick to the silicone based seal I have. I could probably use silicone (738 or GEII) but I was hoping for something like a contact cement which would instantly cure so I wouldn't have to hold it in position over night.
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.