NAS Bolts table

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
arthas
Posts: 2
Joined: Thu Dec 15, 2005 5:29 pm

NAS Bolts table

Post by arthas »

Hello everbody! This is my first post in this forum and I am hoping you can help me. Im looking for a table with all sizes of all NAS bolts like NAS144. Sorry if there is post concerning this topic, but my search found nothing.
Top
User avatar
Bruce Fenstermacher
Posts: 10420
Joined: Tue Apr 23, 2002 11:24 am

Post by Bruce Fenstermacher »

A quick google search on the web for "NAS bolts" reveals this link among several:
http://www.engineersedge.com/quickguide_mil.htm

I don't know it that is what your looking for.
CAUTION - My forum posts may be worth what you paid for them!

Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Top
User avatar
n1410d
Posts: 44
Joined: Sat Jun 22, 2002 2:21 am

Post by n1410d »

If you are looking for the BEST reference book for aircraft hardaware, get onto the Genuine Aircraft Hardware website and order one of their Reference Books. It is a MUST have. This isn't an order catalog but a pure reference manual. It is 260 pages of AN, MS, and NAS bolts, nuts, screws, rivets, grommets, washers, turnbuckles, fluid fittings, hoses etc.

http://www.gen-aircraft-hardware.com/st ... ID=&id=117

After going to the above link select PB REF BOOK from the "select literature/manuals" menu.
The Price is $6.00 and Worth every cent.

Patrick Mahaffey
170A N1410d
Grand Prairie TX
Across from Joe down from Chuck
Top
arthas
Posts: 2
Joined: Thu Dec 15, 2005 5:29 pm

Post by arthas »

Thank you very much, this helped me a lot.
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.