blueprint-engine installation-Lycoming O-360 for C170A

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
lawson
Posts: 25
Joined: Wed Jun 30, 2004 3:54 pm

blueprint-engine installation-Lycoming O-360 for C170A

Post by lawson »

looking for a blueprint of engine installation for lycoming O-360 on a Cessna 170A. I have an STC for the engine, but no other paperwork. Mechanic needs blueprint to verify the engine was installed on plane correctly before 337 is issued. plane has been in annual for over 2 months, because of the paperwork hang up. thank you for any help.
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.