Need help with a rudder measurement

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
dlords
Posts: 27
Joined: Wed Jan 04, 2006 3:58 pm

Need help with a rudder measurement

Post by dlords »

Could anyone out there please measure with the rudder in neutral position from the T/E of the Vertical to the L/E of the corrigated skin (rudder outside skin. not just to the bull nose) on the rudder. I think this might help making some determinations with my rudder installation problems.
Thanks so much all you guys for the help
Top
User avatar
n2582d
Posts: 3013
Joined: Mon Apr 29, 2002 4:58 am

Post by n2582d »

My '52 170B measures .6" at the top of the gap and .76" abeam the rear lower spar fitting (p/n 033124)
Gary
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.