Hey guys, I've been out flying so I can have Christmas (and my also my birthday, alas December 25) off, so I now I can respond to the many suggestions out there. This has been a fun thread!
Mike B. - Thanks for the clock links. Yes, this one is certainly FMA approved, but I'm trying to spend a little less money. Of course I remember your expert duct tape repairs on the infamous Dutch oven known as the Fokker F-28. Are you using the FAA approved Duct tape on the Airbus now? (Just to let everyone in on the joke, Mike is one of the unsung line mechanics that keeps US Airways jets on schedule. He has
a 170A, and his IA as well.)
Dick - I'm not sure where you got the idea I was going to install a 1,200 dollar clock, but like you, the idea gives me heart palpitations. For that matter, anything over about 150 ain't in the cards.
George is quite right. I'm looking for a legal clock for IFR. I'm not going to quote the FAR chapter and verse, but it does state that for IFR you need a clock with a second sweep hand, or an acceptable digital one.
As long as you have a legal clock installed and working in your airplane, you can use a K-Mart digital clock duct-taped to the panel, your wristwatch or an hourglass

to actually time your approach or whatever. IMHO.
As crazy as it sounds, I have never used a kneeboard for IFR work. I write clearances down on a little notebook I keep in the airplane. Enroute charts come from US Airways (believe me, they can spare them) and I use those funky NOAA/DOD approach plates in book form. I only fly IFR under certain conditions...daytime, no icing or convective weather. In the six years I've owned 43A, I've only shot two timed approaches. So, practically speaking I haven't found a need for a chronometer with all the bells and whistles. But I can appreciate that people find them useful.
I've located in my area another watch repair guy that restores/repairs these things. I'll run my clock over to him after the holidays and see what he says. If he can fix it for 100 dollars or so, I'll go that route. Otherwise, I'll install one of the cheaper analog quartz types. The AC Spruce non-approved model is the front runner, if my IA buys it.
Thanks for all the suggestions, guys...Russ Farris
All glory is fleeting...