rudder bellcrank

bodine · Post by **bodine** » Wed May 23, 2007 11:28 am

Hello boy's. Does anybody have a spare rudder bellcrank laying around they want to get rid of? I know i can get one from Univar but just thought i would check before spending the big bucks......

doug8082a · Post by **doug8082a** » Wed May 23, 2007 11:49 am

These tend to wear out, so if you do pick up a used/salvaged one be sure to check it closely before installing it.

gliderman · Post by **gliderman** » Wed May 23, 2007 1:42 pm

Has anyone any experience with the Univair replacment? During my annual, I found that my rudder bellcrank has been damaged and now requires replacement.

doug8082a · Post by **doug8082a** » Wed May 23, 2007 3:17 pm

The Univair is what I installed as a replacment (they have a PMA for this as I recall). It went on with no problems.

markeg1964 · Post by **markeg1964** » Fri May 25, 2007 2:05 pm

During my prior yearâ€™s annual we decided to replace my rudder horn. We didnâ€™t realize how bad it was until it was removed - the arrow is pointing to a crack that is about an inch long!

Unfortunately, Iâ€™m not sure where my A&P purchased the replacement.