Proper Torque Value Scott Model 2600 8" Pneumatic Wheel

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
CBogle
Posts: 142
Joined: Fri Nov 26, 2004 3:14 am

Proper Torque Value Scott Model 2600 8" Pneumatic Wheel

Post by CBogle »

Guys:

I'm replacing the tire and tube on my Scott 8" 3200 tail wheel tomorrow. I have all of the proper torque values with the exception of the 4 bolts that hold the two wheel hubs together. The bolt part number is 33371-005 but the part schematics that I'm looking at don't give what size bolt they are so I can look up standard torque values. Any input would be appreciated.

Thanks,

Curt
Top
User avatar
blueldr
Posts: 4442
Joined: Thu May 02, 2002 3:16 am

Post by blueldr »

If memory serves, I believe those bolts are 1/4x28.
BL
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.