Lower instrument panel covers A model and 1952 B model

[sgrimsley2717]

I am trying to contact a club member who was interested in the extra set of original lower instrument covers and glove box door that I have. I lost the email messages and don't remember the name except that it was Bruce Fenstermacher who referred the person to me. Bruce doesn't remember either. The last contact was back in January. If you are still out there please send another message. Thanks, steve grimsley

[bsdunek]

Hello Steve,
If the person that asked for these doesn't respond in a reasonable amount of time, I might be interested.
I am planning an avionics upgrade this winter, and my left lower panel has quite a large cut-out. If yours is smaller, it would be easier to make things look good.
Please let me know when/if the original person doesn't respond.
Thanks,

[4stripes]

Hello
I had posted on this forum looking for those parts (with no luck). I need a correct glove box door (with hinges) and pilot side panel cover (removed by previous owner for radio panel expansion).
My 1952 panel is complete with those exceptions. I appreciate you posting this thread.
Thanks Eric Klepsch

[4stripes]

My post was in the "trademart" but it appears that the post was deleted. There are only 2 pages of listings now... must be the forum moderators making room???

Cheers Eric

[cessna170bdriver]

My post was in the "trademart" but it appears that the post was deleted. There are only 2 pages of listings now... must be the forum moderators making room???

Cheers Eric

All ads over 6 months old are removed:

http://cessna170.org/phpBB2/viewtopic.php?t=5

[Bruce Fenstermacher]

Steve, Eric this is probably why we/I couldn't find it.

Darn moderators.