Door lock for A model

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
jamyat
Posts: 36
Joined: Wed Jan 05, 2005 11:35 pm

Door lock for A model

Post by jamyat »

I need the z shaped or double L shaped piece that goes on the back of the lock tumbler. The parts manual does not give a part number for it. The manual only shows a lock assembly. I assume the same piece for the B is the same although the part numbers are different for the lock assemblies.

Any ideas about where to find one of these parts?
Top
N2865C
Posts: 507
Joined: Sat Oct 18, 2003 9:07 pm

Re: Door lock for A model

Post by N2865C »

It's standard cabinet lock hardware. Any lock shop should have the cams, but you might have to buy the whole lock that goes with it for around 8 bucks...
John
N2865C
"The only stupid question is one that wasn't asked"
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.