I have my left Bendix Mag (S6LN21) off for overhaul and when I took the wiring harness off, one of the four screws got b!tched up taking it off the back of the mag. Does anyone know off hand what size screw it is? I have them at the hangar and will go out and get it to order one if I have to, but thought someone here might know off hand and save me a trip to the airport. I'm pretty sure it's a Philister head but not sure what size or thread count. I'm going to replace all four.
v/r,
Jud
Bendix Mag Wiring Harness Cap Screw
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
rupertjl
- Posts: 384
- Joined: Thu Jun 17, 2004 5:29 pm
Bendix Mag Wiring Harness Cap Screw
1950 170A: N9191A s/n 19366
-
ronjenx
- Posts: 97
- Joined: Mon Oct 23, 2006 12:57 am
Re: Bendix Mag Wiring Harness Cap Screw
pn 10-35937-10. I believe it is a 10-32. That is just trying to remember what it looks like. Anyway, you have the part number.
-
n2582d
- Posts: 3013
- Joined: Mon Apr 29, 2002 4:58 am
Re: Bendix Mag Wiring Harness Cap Screw
AN501 A10-10 or MS35266-64 (10-32 Fillister Head 5/8" length). 3/4" will also work--the hole (including the harness plate thickness) is nearly 1" deep.
Gary
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.