Spring Gear Inspection/Overhaul

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
mschwab
Posts: 31
Joined: Tue Feb 17, 2009 10:34 pm

Spring Gear Inspection/Overhaul

Post by mschwab »

Dear gahorn;

I read the Landing Gear ALERT dated Sept.22, 2007. Mine has quite a bit of rust on them. I'm so thankful for the ALERT, because I was going to strip them and clean them up "real good". Do you have information or suggestions on where to send them for "?overhaul/inspection". I am so pleased to be able to use this site. I'm not that good on the computer, but you are worth your weight in GOLD! Thank-you for sharing your knowlege with us. Sincerely, Mike Schwab
User avatar
GAHorn
Posts: 21303
Joined: Fri Apr 12, 2002 8:45 pm

Re: Spring Gear Inspection/Overhaul

Post by GAHorn »

Contact Steve Knopp at 360-629-4812 and tell him you heard about him at the 170 Assn website.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
Post Reply
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.