Flap Handle Bushing

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
mike roe
Posts: 352
Joined: Mon Nov 07, 2005 10:53 am

Flap Handle Bushing

Post by mike roe »

Does anyone know where part # 0510177 is located on the flap handle.It is listed on page 113,but not shown on the illustration page 112.It is listed between figure 64 and 65 on page 113.Is their a bushing for the release button?
Top
User avatar
GAHorn
Posts: 21303
Joined: Fri Apr 12, 2002 8:45 pm

Re: Flap Handle Bushing

Post by GAHorn »

I believe the bushing is that which the rivet holds in place upon which the latch rotates. This is the assembly discussed in SAB-090326s in the MX library.

It's unfortunate that no more detail is provided in the IPC regarding this assembly.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
Top
mike roe
Posts: 352
Joined: Mon Nov 07, 2005 10:53 am

Re: Flap Handle Bushing

Post by mike roe »

Thanks George,I think you are right.That part of the illustration leaves alot to be desired.
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.