Control Column Crack

[ronjenx]

I have been searching for the thread about a crack at a drain hole on the lower end of the control column, (control tee) just above the point it connects to the elevator push-pull rod. Fig. 26, in the 170A parts manual. Fig. 61, in the 170B parts manual.
Can someone point me to that thread? I would like to review it before I put my brother's 170A back together.

Thanks.

[n2582d]

George addressed it here. In my opinion, the cost of membership more than pays for itself with access to this post of his alone. It could be a lifesaver.

[ronjenx]

George addressed it here. In my opinion, the cost of membership more than pays for itself with access to this post of his alone. It could be a lifesaver.

You are correct. But I wonder how I saw this in the past if I don't have access to the thread.

[GAHorn]

George addressed it here. In my opinion, the cost of membership more than pays for itself with access to this post of his alone. It could be a lifesaver.

You are correct. But I wonder how I saw this in the past if I don't have access to the thread.

A recent change restricted the MX LIbary to the Members-only section.