Cabin Door Hinge Pins

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
mike roe
Posts: 352
Joined: Mon Nov 07, 2005 10:53 am

Cabin Door Hinge Pins

Post by mike roe »

Looking for a part # on the new stainless replacement hinge pins(upper and lower)also if someone has any of these to measure diameter.Hoping they are .093-.096 range.
Top
User avatar
N2255D
Posts: 489
Joined: Wed Apr 24, 2002 3:42 am

Re: Cabin Door Hinge Pins

Post by N2255D »

Will this help? http://www.cessna170.org/forums/viewtop ... ins#p60435
Walt Weaver
Spencer Airport (NC35)
Top
User avatar
GAHorn
Posts: 21308
Joined: Fri Apr 12, 2002 8:45 pm

Re: Cabin Door Hinge Pins

Post by GAHorn »

Not Cessna (and therefore not as original as one might prefer) but....from the local Tractor Supply Co. or hardware store:
You do not have the required permissions to view the files attached to this post.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons. ;)
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.