I plan on installing the P Ponk beef up and I need to get the wheels off the ground.I know how to jack the later models but off the top of my mind I dont know on the 48.
Thanks,
Vic
jacking
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
mrpibb
- Posts: 395
- Joined: Wed Apr 23, 2003 10:48 pm
jacking
Can anyone tell me the proper way to jack a 170 ragwing? I plan on installing the P Ponk beef up and I need to get the wheels off the ground.
I know how to jack the later models but off the top of my mind I dont know on the 48.
Thanks,
Vic
I plan on installing the P Ponk beef up and I need to get the wheels off the ground.I know how to jack the later models but off the top of my mind I dont know on the 48.
Thanks,
Vic
Vic
N2609V
48 Ragwing
A Lanber 2097 12 gauge O/U Sporting
A happy go lucky Ruger Red label 20 ga
12N Aeroflex
Andover NJ
http://www.sandhillaviation.com
" Air is free untill you have to move it" BB.
N2609V
48 Ragwing
A Lanber 2097 12 gauge O/U Sporting
A happy go lucky Ruger Red label 20 ga
12N Aeroflex
Andover NJ
http://www.sandhillaviation.com
" Air is free untill you have to move it" BB.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.