Only the 48 is a 170 and a rag wing. The A from 49 to 51 have metal wings unbalanced elevator, do dihedral and small flaps that deploy to 50 degrees. The B model from 52 to 56 has metal wings, dihedral, large flaps that deploy to 40 degrees and a balanced elevator. Of course there are other differences between the models but those are the high points most consider at first blush looking at the 170 line.airtractorflyer wrote:So is the 170A rag wing, or just has no dihedral? And the B has dihedral. Straight 170
Have a 170 question
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
- Bruce Fenstermacher
- Posts: 10427
- Joined: Tue Apr 23, 2002 11:24 am
Re: Have a 170 question
CAUTION - My forum posts may be worth what you paid for them!
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
Bruce Fenstermacher, Past President, TIC170A
Email: brucefenster at gmail.com
-
- Posts: 11
- Joined: Mon Nov 16, 2009 9:11 pm
Re: Have a 170 question
Thanks guys!!!
-
- Posts: 11
- Joined: Mon Nov 16, 2009 9:11 pm
Re: Have a 170 question
I been looking at a couple of 170A's on trade a plane.
- jrenwick
- Posts: 2045
- Joined: Thu Apr 01, 2004 8:34 pm
Re: Have a 170 question
Sorry, I don't remember the prop details. I think both airplanes had the same prop, not a climb prop. The prop on mine wasn't changed when the STOL kit was installed. Both airplanes had approximately the same cruise performance, 117MPH or so at 2450 RPM. My 170 had 8.00x6 tires, and the stock one has 6.00x6 with wheel pants, and red paint -- so it cruised a little bit faster than mine by 1 or 2 MPH.gahorn wrote:What PROP did the "stock" 170-B have?jrenwick wrote:bagarre wrote:... I think with the mod, the wing has a higher lift coefficient, so you get more lift for the same power. In any case, this is what I know from doing flight-of-two takeoffs with a stock 170B. I could always outclimb the stock airplane.
John Renwick
Minneapolis, MN
Former owner, '55 C-170B, N4401B
'42 J-3 Cub, N62088
'50 Swift GC-1B, N2431B, Oshkosh 2009 Outstanding Swift Award, 2016 Best Continuously Maintained Swift
Minneapolis, MN
Former owner, '55 C-170B, N4401B
'42 J-3 Cub, N62088
'50 Swift GC-1B, N2431B, Oshkosh 2009 Outstanding Swift Award, 2016 Best Continuously Maintained Swift
-
- Posts: 87
- Joined: Fri Oct 29, 2010 12:45 am
Re: Have a 170 question
1300ft is doable especially with no obstacles. I've flown my 170 out of much less. Here are a couple videos going out of Buzzlatka's 1300ft strip surrounded by tall trees. This is with a stock wing and an 80/42 prop. It now has a Sportsman on it as well.
https://vimeo.com/34146329
https://vimeo.com/34146671
https://vimeo.com/34146329
https://vimeo.com/34146671
- pdb
- Posts: 471
- Joined: Tue Apr 23, 2002 3:39 am
Re: Have a 170 question
The 170 in the Buzzlatka video appears to have an empty backseat on takeoff. The machine behaves much differently with two adults, a boy, and full tanks.
Pete Brown
Anchorage, Alaska
N4563C 1953 170B
http://farm3.staticflickr.com/2366/2527 ... 4e43_b.jpg
Anchorage, Alaska
N4563C 1953 170B
http://farm3.staticflickr.com/2366/2527 ... 4e43_b.jpg
-
- Posts: 87
- Joined: Fri Oct 29, 2010 12:45 am
Re: Have a 170 question
I did have the back seat out. Actually its always out because I usually just fly with my wife, then have plenty of space for camping gear and the dog. But Buzzlatka and I do go in and out of that strip with 2 aboard and full fuel with our 170s.
-
- Posts: 168
- Joined: Thu Feb 16, 2006 11:39 pm
Re: Have a 170 question
1300 ft with no obstacles is no problem with 2 adults and a kid. My strip is a little over 1200 ft and has tall trees right at the ends. With no obstacles you can actually use all 1300 ft.
My 170 1st went into this strip stock c-145 motor with a 7653 prop. I later switched to a 7651 and noticed a little better performance. I went into this strip on a 70 degree day at around 1800 lbs. Thats 2 big dudes and 20 gallons of gas. It was very tight and the little tailwind of a breeze that picked up didn't help.
I would comfortably fly the wife and kids out of a 1300 ft strip with no obstacles. Could probably do it with full tanks and light bags.
If you start doing modifications like the seaplane prop or stol kit (robs setup) you could go out of a 1300 ft strip at gross with a little density altitude. I think his 170 could tow a 180 out of my strip.
Steve
My 170 1st went into this strip stock c-145 motor with a 7653 prop. I later switched to a 7651 and noticed a little better performance. I went into this strip on a 70 degree day at around 1800 lbs. Thats 2 big dudes and 20 gallons of gas. It was very tight and the little tailwind of a breeze that picked up didn't help.
I would comfortably fly the wife and kids out of a 1300 ft strip with no obstacles. Could probably do it with full tanks and light bags.
If you start doing modifications like the seaplane prop or stol kit (robs setup) you could go out of a 1300 ft strip at gross with a little density altitude. I think his 170 could tow a 180 out of my strip.
Steve
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.