Fuel Selector Etched Plate

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
User avatar
sfarringer
Posts: 323
Joined: Wed Jan 12, 2005 10:49 pm

Re: Fuel Selector Etched Plate

Post by sfarringer »

Bruce Fenstermacher wrote:Well that would make perfect sense Bill but something is still not right with the IPC. In my picture you can see what looks like 4 tabs sticking out the 4 quaderants of the selector. In the IPC this part is clear and for 18574 and later. The IPC does not show this part before 18573.
I see what you mean.....
But, I know personally of three early 48's which have that arrangement.
I wonder if there was a retrofit kit that added the parts. Or maybe it is just an omission in the IPC.
Ragwing S/N 18073
Top
DWood
Posts: 527
Joined: Sun Oct 10, 2004 2:59 pm

Re: Fuel Selector Etched Plate

Post by DWood »

Dave:
Please send me an email to my address below and I will give you a start on a decal for your 48.
Thx,
Dan
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.