One of my buddies is re-doing the panel on his RV and removed his old TKM MX-11 Comm unit. He said it works great and was willing to trade it for an old handheld radio that I have. So...now I have a radio for my project. Only problem is that I don't have a manual for this unit. I searched on the ole' internet and couldn't come up with anything. If by any chance someone has an old manual sitting around and wouldn't mind scanning the pin-out diagram for me I would be greatly appreciative. Doesn't seem too complicated but I want to make sure I get the wiring right the first time.
Thanks, Mike
TKM MX-11 COMM Pin-out
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
T. C. Downey
- Posts: 548
- Joined: Sat Jan 26, 2013 5:58 am
Re: TKM MX-11 COMM Pin-out
I have that Pin out at the hangar, I'll fetch it today and scan it in for an attachment here shortly.
COM 11A Pinout:
1-Ground
2-Mic Ground
3-Phones
4-Mic Key
5-Speaker
6-Speaker and Phones Ground
7-Audio In
8-Low Level Audio Out
9-Mic Audio
10-Dimmer Light
13+14 14V Input
If no Audio panel connect a 1500 ohm resistor between 7&8
6-11-12-&15 N/C
There is also a download button in the second message here
http://forums.matronics.com/viewtopic.p ... 7144c3651f
COM 11A Pinout:
1-Ground
2-Mic Ground
3-Phones
4-Mic Key
5-Speaker
6-Speaker and Phones Ground
7-Audio In
8-Low Level Audio Out
9-Mic Audio
10-Dimmer Light
13+14 14V Input
If no Audio panel connect a 1500 ohm resistor between 7&8
6-11-12-&15 N/C
There is also a download button in the second message here
http://forums.matronics.com/viewtopic.p ... 7144c3651f
-
C170U2
- Posts: 436
- Joined: Sat Dec 22, 2012 4:30 am
Re: TKM MX-11 COMM Pin-out
THANK YOU!!! Great help!!
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.