Page 2 of 2
Re: 55' 170B nose bowl and exhaust
Posted: Tue Jan 19, 2016 3:33 pm
by 170C
You won't regret putting the Bartone exhausts on your plane. I have had mine for over 15 yrs and am very satisfied.
Re: 55' 170B nose bowl and exhaust
Posted: Thu Jan 21, 2016 5:56 am
by Waterboy
cessna170bdriver wrote:Bruce, I just ordered a set and verified with Pat personally that he now has an STC.
Could you please tell us the current going price?
Thanks
Ken
Re: 55' 170B nose bowl and exhaust
Posted: Fri Jan 22, 2016 5:04 am
by cessna170bdriver
Waterboy wrote:cessna170bdriver wrote:Bruce, I just ordered a set and verified with Pat personally that he now has an STC.
Could you please tell us the current going price?
Thanks
Ken
He charged me $475
Re: 55' 170B nose bowl and exhaust
Posted: Fri Jan 29, 2016 1:29 am
by gfeher
I just reported this in the thread about John Benham's pipes. But I'll repeat it here since the STC is mentioned here as well.
Pat Bartone's STC is No. SA8645SW. It's available on the FAA's website at:
http://rgl.faa.gov/Regulatory_and_Guida ... t=sa8645sw
The description line says "Installation of extended exhaust pipes in accordance with John Benham, Parts List, PL-1001-001 Rev. C, dated March 7, 1993 or later FAA approved revisions."
So it looks like Pat bought John's STC. However, the parts list is not attached to the STC. If anyone has a copy of the parts list, can you put a copy in the MX Library? Thanks in advance.
Re: 55' 170B nose bowl and exhaust
Posted: Fri Jan 29, 2016 7:08 am
by cessna170bdriver
gfeher wrote:...If anyone has a copy of the parts list, can you put a copy in the MX Library? Thanks in advance.
As I recall the Benham instructions were very sketchy, consisting mainly of a crude hand-drawn sketch of how things go together. I'll dig through my paperwork and see what I can find.