Bracket, Rudder Cable Fairlead

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
spduffee
Posts: 219
Joined: Wed Sep 26, 2012 4:48 am

Bracket, Rudder Cable Fairlead

Post by spduffee »

Good day,

Would someone be able to take a snapshot, or three, of the correct configuration of the 170A rudder cables and their fairlead brackets, as noted in the parts manual attachment? The brackets are the final piece to be installed aft, and I cannot, for the life of me, remember how it all should look.

Thank you, in advance!

Shawn
++170a_pm++ 54.jpg
You do not have the required permissions to view the files attached to this post.
N5448C -1950 170-A
Top
User avatar
johneeb
Posts: 1543
Joined: Thu Jun 26, 2003 2:44 am

Re: Bracket, Rudder Cable Fairlead

Post by johneeb »

Rudder Cable Fairleads.jpg
Shawn, sorry about the photo quality. This is the way they look in my B model.
You do not have the required permissions to view the files attached to this post.
John E. Barrett
aka. Johneb
Sent from my "Cray Super Computer"
Top
spduffee
Posts: 219
Joined: Wed Sep 26, 2012 4:48 am

Re: Bracket, Rudder Cable Fairlead

Post by spduffee »

D-ohhh! Of course they have to go on the inside! I was sure I remembered them on the outside, but couldn't Imagine how that could possibly work...geez. That's what happens when you wait too long to get things done....Thank you!
N5448C -1950 170-A
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.