Anyone know where I can get more of these clip-on clamps? They sure beat trying to drill holes and fit Adel clamps under the floor. I thought I saw the part number in the IPC, but I can't find it now.
Tinnerman cable clamp
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
DaveF
- Posts: 1563
- Joined: Sat Nov 03, 2007 1:44 am
Tinnerman cable clamp
You do not have the required permissions to view the files attached to this post.
-
jrenwick
- Posts: 2045
- Joined: Thu Apr 01, 2004 8:34 pm
Re: Tinnerman cable clamp
Dave,
If you can't find the original, could you substitute something like this? http://www.alliedelec.com/hellermanntyt ... /70162991/
I found that by googling "edge biter wire clip". There surely are others to choose from.
If you can't find the original, could you substitute something like this? http://www.alliedelec.com/hellermanntyt ... /70162991/
I found that by googling "edge biter wire clip". There surely are others to choose from.
John Renwick
Minneapolis, MN
Former owner, '55 C-170B, N4401B
'42 J-3 Cub, N62088
'50 Swift GC-1B, N2431B, Oshkosh 2009 Outstanding Swift Award, 2016 Best Continuously Maintained Swift
Minneapolis, MN
Former owner, '55 C-170B, N4401B
'42 J-3 Cub, N62088
'50 Swift GC-1B, N2431B, Oshkosh 2009 Outstanding Swift Award, 2016 Best Continuously Maintained Swift
-
daedaluscan
- Posts: 497
- Joined: Fri Apr 20, 2012 7:03 pm
Re: Tinnerman cable clamp
They look very useful.jrenwick wrote:Dave,
If you can't find the original, could you substitute something like this? http://www.alliedelec.com/hellermanntyt ... /70162991/
I found that by googling "edge biter wire clip". There surely are others to choose from.
I am convinced that there is lots of really cool stuff available that we haven't thought of to look for.
I found this stuff the other day and made a new switch for my motorbike headliights with a blob of it it on a screw - it has held up for over a year
https://sugru.com/buy?gclid=CN3yjNGb08UCFZSCaQodwyUAig
Charlie
1956 170B C-GDRG #27019
1956 170B C-GDRG #27019
-
GAHorn
- Posts: 21295
- Joined: Fri Apr 12, 2002 8:45 pm
Re: Tinnerman cable clamp
Similar:
http://www.efc-intl.com/products/efc-el ... undles.htm
Plastic:
http://www.efc-intl.com/products/efc-el ... -panel.htm
Wide Assrt'd:
http://www.efc-intl.com/products/efc-electrical.htm
http://www.efc-intl.com/products/efc-el ... undles.htm
Plastic:
http://www.efc-intl.com/products/efc-el ... -panel.htm
Wide Assrt'd:
http://www.efc-intl.com/products/efc-electrical.htm
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
-
DaveF
- Posts: 1563
- Joined: Sat Nov 03, 2007 1:44 am
Re: Tinnerman cable clamp
Thanks for all the suggestions. I like the idea of plastic to avoid dissimilar metal problems, though the clamp I showed has been in my airplane for at least 50 years and it's still in good condition.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.