Can someone ID these two fasteners?
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
n2582d
- Posts: 3013
- Joined: Mon Apr 29, 2002 4:58 am
Re: Can someone ID these two fasteners?
Wes,
The red one is a Hi-Lok which has been incorrectly installed. The bolt is too short. Cessna allows the use of these fasteners as replacement for Hi-Shear rivets (which are called for in the landing gear bulkhead area. See fig. 21 in the 170B IPC). I believe the hex nut is a NAS1669 Jo-Bolt.
The red one is a Hi-Lok which has been incorrectly installed. The bolt is too short. Cessna allows the use of these fasteners as replacement for Hi-Shear rivets (which are called for in the landing gear bulkhead area. See fig. 21 in the 170B IPC). I believe the hex nut is a NAS1669 Jo-Bolt.
Gary
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.