The International Cessna^® 170 Association

The rub strip material attached to my cowling that goes around the air filter is starting to disintegrate. I couldn't find the Cessna part, but I did find this:

http://www.brownaircraft.com/category-s/73.htm

The Cessna part in the IPC looks to be a similar part number to the rub strip used on all the other engine baffling.

What are you all using when this material needs to be replaced?

Thanks,

Ryan

This is what I believe you want:

http://www.brownaircraft.com/product-p/ba-28-1.htm#

Thanks for the reply. I'm glad to see that's the solution. It will save me the cost of buying a 9-foot section of the other stuff!