Ever seen this? Installed 100 hrs and two years ago.
It appears my Turn and Slip needle broke
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
mmcmillan2
- Posts: 175
- Joined: Sat Jul 04, 2020 9:30 pm
It appears my Turn and Slip needle broke
You do not have the required permissions to view the files attached to this post.
170B owner, KCFD, CFI(I), ATP Multi
-
mit
- Posts: 1067
- Joined: Wed May 01, 2002 1:54 am
-
GAHorn
- Posts: 21290
- Joined: Fri Apr 12, 2002 8:45 pm
Re: It appears my Turn and Slip needle broke
I think you need a little-bit more right aileron...
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
-
mmcmillan2
- Posts: 175
- Joined: Sat Jul 04, 2020 9:30 pm
Re: It appears my Turn and Slip needle broke
Yea, all I use is the ball typically. Look at that little screw sitting in the bottom, looks like it’s a simple fix. I’m sending it to Century Instrument Corp., hoping they give me a cheap rate if it is a quick fix. It would be real cool to swap it with an RC Allen attitude indicator with Rate and Ball, but that’s $2500.
You do not have the required permissions to view the files attached to this post.
170B owner, KCFD, CFI(I), ATP Multi
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.