im urgently looking for a CAD diagram that can be used to cut a new instrument panel for my 48.
Ive looked, dropped messages on the FB groups, but nothing comes up.
Surely, someone has done it during the last 73 years..
thanks
Stuart
48 Instrument Panel - CAD
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
stuartsaward1970
- Posts: 1
- Joined: Thu Jul 01, 2021 1:32 pm
48 Instrument Panel - CAD
hi there,
im urgently looking for a CAD diagram that can be used to cut a new instrument panel for my 48.
Ive looked, dropped messages on the FB groups, but nothing comes up.
Surely, someone has done it during the last 73 years..
thanks
Stuart
im urgently looking for a CAD diagram that can be used to cut a new instrument panel for my 48.
Ive looked, dropped messages on the FB groups, but nothing comes up.
Surely, someone has done it during the last 73 years..
thanks
Stuart
-
n2582d
- Posts: 3011
- Joined: Mon Apr 29, 2002 4:58 am
Re: 48 Instrument Panel - CAD
Stuart,
Welcome!
Ryan Smith went to a lot of work making CAD instrument panel drawings as found here. Your membership dues just paid for themselves thanks to Ryan.
Welcome!
Ryan Smith went to a lot of work making CAD instrument panel drawings as found here. Your membership dues just paid for themselves thanks to Ryan.
Gary
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.