I have recently got a pair of Fli Lite 3000 mk III hyd wheel skis.
I have a complete set of drawing for the C 170 instllation.
My skis however are configured for either Piper or Maule insatllation, so I hve the wrong yokes and axels and cables.( so I am told.) Can anyone help me out?? I need, Cessna yokes for the skis, and cable attach brackets ( which go on the fuselage) , and the axle inserts and the stub axles which go on the inboard side of the gear leg.
I have with them a electric hyd pump but it looks home made ?? So I am also looking for a hyd hand pump is what the drawings call for.
I have contacted wipaire , and they say they have none of these pieces, I am working another angle with wipaire with a friend , and I have also contacted Kelly at http://www.Wheelskis.com , and am again waitng from him
( too early in the season )
Anyone out here that has this installation who can assist me would be greatly appreciated , pictures help greatly as well.
Thanks in advance John
fli Lite wheel skis
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
- Green Bean
- Posts: 163
- Joined: Tue May 06, 2003 2:13 am
Ski Parts
You might give Atlee Dodge, ask for Steve, a try. Anchorage, Alaska 907-344-1755. They should be able to help you with the Springs, Brackets, and axles.