NAS228-10, MS #?

How to keep the Cessna 170 flying and airworthy.

Moderators: GAHorn, Karl Towle, Bruce Fenstermacher

Post Reply
cfiatzph
Posts: 123
Joined: Sat Nov 19, 2005 11:04 pm

NAS228-10, MS #?

Post by cfiatzph »

Does anybody know the NAS228-10 conversion for a MS screw?

Thanks
Top
wingnut
Posts: 990
Joined: Fri Dec 15, 2006 7:58 pm

Post by wingnut »

MS27039-0810. The difference in the #'s can be confusing. In this case the MS27039 is a base PN for a structural screw. The 08 is diameter and the 10 is length. Put a C in place of the dash and get corrosion resistant (looks like a matte finish stainless), which is still an approved structural fastener. Are you replacing tank top screws?
Del Lehmann
Mena, Arkansas
Top
Post Reply

Return to “The Hangar”

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.