Hey Guys:
My fuel guage magnet came undone and just spun around. I spot welded it and it held good, but De-magnitized. I've played around with it but can't seem to get it as strong as the other one. Is there a technique to magnitizing this magnent? Thanks for any tips. Mike
Scott Fuel Guage
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
GAHorn
- Posts: 21302
- Joined: Fri Apr 12, 2002 8:45 pm
Re: Scott Fuel Guage
Replace it. $69. http://www.aircraftspruce.com/catalog/i ... _gauge.php
(Next time use epoxy or JB Weld.)
(Next time use epoxy or JB Weld.)
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.