Ski Bottoms
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
Mark Harwood
- Posts: 75
- Joined: Wed Aug 23, 2006 1:00 am
Ski Bottoms
Where can I find the teflon or white plastic that I have seen rivited to the bottom of some skis. Is this an approved mod? I have fed 2500 skis Thanks Mark
-
jrenwick
- Posts: 2045
- Joined: Thu Apr 01, 2004 8:34 pm
Re: Ski Bottoms
You can buy it, as well as the rivets needed to install it and other supplies, from:
Aero Ski Manufacturing Co
48010 260th St
Brooten, MN 56316
(320) 346-2285
They're located in a hangar at the Brooten Municipal Airport (6D1)
Aero Ski Manufacturing Co
48010 260th St
Brooten, MN 56316
(320) 346-2285
They're located in a hangar at the Brooten Municipal Airport (6D1)
John Renwick
Minneapolis, MN
Former owner, '55 C-170B, N4401B
'42 J-3 Cub, N62088
'50 Swift GC-1B, N2431B, Oshkosh 2009 Outstanding Swift Award, 2016 Best Continuously Maintained Swift
Minneapolis, MN
Former owner, '55 C-170B, N4401B
'42 J-3 Cub, N62088
'50 Swift GC-1B, N2431B, Oshkosh 2009 Outstanding Swift Award, 2016 Best Continuously Maintained Swift
-
Mark Harwood
- Posts: 75
- Joined: Wed Aug 23, 2006 1:00 am
-
jrenwick
- Posts: 2045
- Joined: Thu Apr 01, 2004 8:34 pm
Re: Ski Bottoms
No problem. I've replaced the plastic bottom on one of my Federal 1500s (for my J3), so I'm somewhat familiar with the process. If I can be of any further help, feel free to call. I'm in the 170 Association book.
John
John
-
Green Bean
- Posts: 163
- Joined: Tue May 06, 2003 2:13 am
Re: Ski Bottoms
1/4 screws and nuts with cone washers work better and , and most plastic places carry the 1/4 MWR.
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.