Page 1 of 1
Ski Bottoms
Posted: Mon Nov 09, 2009 12:38 am
by Mark Harwood
Where can I find the teflon or white plastic that I have seen rivited to the bottom of some skis. Is this an approved mod? I have fed 2500 skis Thanks Mark
Re: Ski Bottoms
Posted: Mon Nov 09, 2009 2:34 am
by jrenwick
You can buy it, as well as the rivets needed to install it and other supplies, from:
Aero Ski Manufacturing Co
48010 260th St
Brooten, MN 56316
(320) 346-2285
They're located in a hangar at the Brooten Municipal Airport (6D1)
Re: Ski Bottoms
Posted: Mon Nov 09, 2009 11:36 pm
by Mark Harwood
Thanks John
Re: Ski Bottoms
Posted: Tue Nov 10, 2009 12:02 am
by jrenwick
No problem. I've replaced the plastic bottom on one of my Federal 1500s (for my J3), so I'm somewhat familiar with the process. If I can be of any further help, feel free to call. I'm in the 170 Association book.
John
Re: Ski Bottoms
Posted: Fri Nov 20, 2009 6:32 am
by Green Bean
1/4 screws and nuts with cone washers work better and , and most plastic places carry the 1/4 MWR.