It may be a sign of the times. Hawker Beechcraft has notified owners of "Classic" aircraft that they will no longer provide many support tasks which they formerly have provided without charge. In the near future, if you have an out-of-production model aircraft, such as older Bonanza's/Debonairs, etc etc., if you contact them for support or technical advice, you can expect a $125/hour fee for the service.
Doubtless, the other mfr's will notice this and likely will follow suit. (I anticipate this to be a boon for type-clubs such as ours which provide valuable technical support free-of-charge to it's members.)
Here's their notification letter:
Manufacturers considering Fees for services...
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
- GAHorn
- Posts: 21308
- Joined: Fri Apr 12, 2002 8:45 pm
Manufacturers considering Fees for services...
You do not have the required permissions to view the files attached to this post.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.

- blueldr
- Posts: 4442
- Joined: Thu May 02, 2002 3:16 am
Re: Manufacturers considering Fees for services...
Looks like sombody at Hawker-Beech just got a doctors bill and they're gonna get even. Don't most flying medics fly the famous "Forked Tail Doctor Killer?
BL
-
- Posts: 990
- Joined: Fri Dec 15, 2006 7:58 pm
Re: Manufacturers considering Fees for services...
The formal letter may be new, but had this problem with Beech tech about 3 years ago on a P Baron. Can't use AC43.13 on pressurized aircraft, and the skin I needed was not available and had an indefinate lead time. I made all the proposed repair drawings, and they still pushed me to use a DER. Another way of limiting any liability on these older birds.
Del Lehmann
Mena, Arkansas
Mena, Arkansas
- Brad Brady
- Posts: 745
- Joined: Fri Feb 29, 2008 2:54 am
Re: Manufacturers considering Fees for services...
George,gahorn wrote:It may be a sign of the times. Hawker Beechcraft has notified owners of "Classic" aircraft that they will no longer provide many support tasks which they formerly have provided without charge. In the near future, if you have an out-of-production model aircraft, such as older Bonanza's/Debonairs, etc etc., if you contact them for support or technical advice, you can expect a $125/hour fee for the service.
Doubtless, the other mfr's will notice this and likely will follow suit. (I anticipate this to be a boon for type-clubs such as ours which provide valuable technical support free-of-charge to it's members.)
Here's their notification letter:
I just called George Wilhemsen...A friend of mine, That wrights for several services,including the ABS ,EAA, Plane and Pilot..He never calls Beech for information...He, Like us uses something other, like the ABS for his needs. They,(the ABS), like us have found a better way than the manufacturer...Brad
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.