The International Cessna 170 Association

Am planning a trip in my 182 (sold my beloved 170B) from NW Montana to Gakona (Gulkana) NE of Anchorage. I have 4-5 hours fuel and can, but prefer not to, use autogas. Any flight plan ideas or tips? Thanks.

Thanks everyone for your able assistance. I did visit with Tom at xpmods who kindly answered my questions. Thanks again.

tony

Thanks everyone for your help with this. I did talk with tom at xpmods who kindly provided the info I needed. The 170 community and this site are amazing....ask a question....get the answer. Thanks again.

tony

I had some 180 gear legs (pn 0741001-1/2) installed on my 170B (sn 25190). They replaced stock 170B gear legs (pn 0541114). This work was done under an STC. Unfortunately when the work was done, prior to a new weight and balance being completed, the new legs were not weighed, and the old legs have b...

I had some 180 gear legs (pn 0741001-1/2) installed on my 170B (sn 25190). They replaced stock 170B gear legs (pn 0541114). This work was done under an STC. Unfortunately when the work was done, prior to a new weight and balance being completed, the new legs were not weighed, and the old legs have b...

Russ....i think my ap is taking care of a 337. we'll see.

thanks. my ap is taking care of it today.

I just changed my gear legs to 180 and I used a 1'' di. rope tied it as close to the fire wall on the upper engine mount and lifted from there,worked fine I was low on fuel do one side at a time and you will be fine., I had it up with two engine pullers no problem. Russ Russ, my ap changed my 170B ...

I recently recieved an STC to install Cessna 180 gear legs 0741001-1 and 0741001-2 or 0741001-3 and 0741001-4 or 0741001-5 and 0741001-6 on the 170B. Thought I would check to see if sufficient interest exists in that conversion to bother with the paperwork necessary to transfer the STC to others. T...

Thanks everyone for your assistance....this forum works great.

My Cleveland Wheels have 3 screw holes, presumably for mounting some sort of hub cover. Any idea where these covers can be acquired?