Hi All
I am also going to put my wheelpants on in the spring. I have one backplate with nutplates and one with Tinnerman nuts. That's ok with me but I cannot find the axel nuts for wheelpants. I did find them for $350 ea. but I will keep searching.
N2704C
KPYM
Wheel Pant Hardware/Parts Sources
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
- Posts: 2615
- Joined: Thu Sep 30, 2010 11:35 pm
Re: Wheel Pant Hardware/Parts Sources
They are all over ebay for $30 a pop.
Thats a low enough risk to buy as is and inspect for condition to be installed.
Thats a low enough risk to buy as is and inspect for condition to be installed.
- GAHorn
- Posts: 21295
- Joined: Fri Apr 12, 2002 8:45 pm
Re: Wheel Pant Hardware/Parts Sources
Yep... they are available used. But be careful... they're LENGTH is important.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.

- GAHorn
- Posts: 21295
- Joined: Fri Apr 12, 2002 8:45 pm
Re: Wheel Pant Hardware/Parts Sources
In a follow-up to this discussion.... the axle nuts for the wheel pants should be 2-15/16" long (almost 3 inches.) When shopping at E-barf many different lengths are offered, so be careful.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.

Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.