55' 170B nose bowl and exhaust
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
170C
- Posts: 3182
- Joined: Tue May 06, 2003 11:59 am
Re: 55' 170B nose bowl and exhaust
You won't regret putting the Bartone exhausts on your plane. I have had mine for over 15 yrs and am very satisfied.
OLE POKEY
170C
Director:
2012-2018
170C
Director:
2012-2018
-
Waterboy
- Posts: 33
- Joined: Thu Sep 19, 2013 11:00 am
Re: 55' 170B nose bowl and exhaust
Could you please tell us the current going price?cessna170bdriver wrote:Bruce, I just ordered a set and verified with Pat personally that he now has an STC.
Thanks
Ken
-
cessna170bdriver
- Posts: 4115
- Joined: Mon Apr 22, 2002 5:13 pm
Re: 55' 170B nose bowl and exhaust
He charged me $475Waterboy wrote:Could you please tell us the current going price?cessna170bdriver wrote:Bruce, I just ordered a set and verified with Pat personally that he now has an STC.
Thanks
Ken
Miles
“I envy no man that knows more than myself, but pity them that know less.”
— Thomas Browne
“I envy no man that knows more than myself, but pity them that know less.”
— Thomas Browne
-
gfeher
- Posts: 588
- Joined: Fri Sep 26, 2014 9:19 pm
Re: 55' 170B nose bowl and exhaust
I just reported this in the thread about John Benham's pipes. But I'll repeat it here since the STC is mentioned here as well.
Pat Bartone's STC is No. SA8645SW. It's available on the FAA's website at: http://rgl.faa.gov/Regulatory_and_Guida ... t=sa8645sw
The description line says "Installation of extended exhaust pipes in accordance with John Benham, Parts List, PL-1001-001 Rev. C, dated March 7, 1993 or later FAA approved revisions."
So it looks like Pat bought John's STC. However, the parts list is not attached to the STC. If anyone has a copy of the parts list, can you put a copy in the MX Library? Thanks in advance.
Pat Bartone's STC is No. SA8645SW. It's available on the FAA's website at: http://rgl.faa.gov/Regulatory_and_Guida ... t=sa8645sw
The description line says "Installation of extended exhaust pipes in accordance with John Benham, Parts List, PL-1001-001 Rev. C, dated March 7, 1993 or later FAA approved revisions."
So it looks like Pat bought John's STC. However, the parts list is not attached to the STC. If anyone has a copy of the parts list, can you put a copy in the MX Library? Thanks in advance.
Gene Feher
Argyle (1C3), NY
'52 170B N2315D s/n 20467 C-145-2
Experimental J3 Cub Copy N7GW O-200
Argyle (1C3), NY
'52 170B N2315D s/n 20467 C-145-2
Experimental J3 Cub Copy N7GW O-200
-
cessna170bdriver
- Posts: 4115
- Joined: Mon Apr 22, 2002 5:13 pm
Re: 55' 170B nose bowl and exhaust
As I recall the Benham instructions were very sketchy, consisting mainly of a crude hand-drawn sketch of how things go together. I'll dig through my paperwork and see what I can find.gfeher wrote:...If anyone has a copy of the parts list, can you put a copy in the MX Library? Thanks in advance.
Miles
“I envy no man that knows more than myself, but pity them that know less.”
— Thomas Browne
“I envy no man that knows more than myself, but pity them that know less.”
— Thomas Browne
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.