Good Afternoon Everyone,
I have looked in my copy of the IPC but am unable to locate trim rings for the 2 1/4" gage panel holes. I have a few spare 3" rings but seek some 2 1/4" pieces. Are they made, and what is the part number? Oh yes, the correct location in my IPC would be helpfull too.
Thanks in advance,
Kyle T.
Panel Trim Rings
Moderators: GAHorn, Karl Towle, Bruce Fenstermacher
-
Kyle
- Posts: 217
- Joined: Mon Aug 29, 2005 1:23 am
Panel Trim Rings
Kyle Takakjian
Truro, MA
52 C-170B, N8087A
Truro, MA
52 C-170B, N8087A
-
GAHorn
- Posts: 21308
- Joined: Fri Apr 12, 2002 8:45 pm
Re: Panel Trim Rings
Kyle, I believe the "Bezel" (s) were only original to the "floating" panel gauges, not the 2-1/4" instruments (which usually had "rings" or small bezels as part of their mfr. The Bezels for the gyros, etc. are found on page 72 of the B-model IPC.
'53 B-model N146YS SN:25713
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
50th Anniversary of Flight Model. Winner-Best Original 170B, 100th Anniversary of Flight Convention.
An originality nut (mostly) for the right reasons.
-
Kyle
- Posts: 217
- Joined: Mon Aug 29, 2005 1:23 am
Re: Panel Trim Rings
George,
My thanks... One of these days when I get a webb page up and running I'll be able to post pictures of how my panel is coming along. Actually we are making good progress, the sub panel is almost conpleted and the overlay panel has all the holes cut. I'm now in the process of making some "bezels" by hand and should have all the parts and pieces soon
Thanks again.
Kyle
My thanks... One of these days when I get a webb page up and running I'll be able to post pictures of how my panel is coming along. Actually we are making good progress, the sub panel is almost conpleted and the overlay panel has all the holes cut. I'm now in the process of making some "bezels" by hand and should have all the parts and pieces soon
Thanks again.
Kyle
Kyle Takakjian
Truro, MA
52 C-170B, N8087A
Truro, MA
52 C-170B, N8087A
Cessna® is a registered trademark of Textron Aviation, Inc. The International Cessna® 170 Association is an independent owners/operators association dedicated to C170 aircraft and early O-300-powered C172s. We are not affiliated with Cessna® or Textron Aviation, Inc. in any way.